How to Cut Dog Hair at Home with Clippers

minute/s reading time

We may earn a commission when you buy through our links, at no extra cost to you.

Tell me if this sounds familiar. Your dog is due for a haircut, the groomer is booked out for
weeks, and you've got a pair of clippers sitting in a drawer. You want to do it yourself, but
one question stops you: what if I hurt my dog?

You're not alone. More than half of U.S. dog owners (51%) now groom at home, according
to the American Pet Products Association's 2026 Dog Report. Most of them aren't pros.
They learned a few simple rules first.

That's what this guide gives you: how to prepare, which blade to use, the exact order to
clip, and the mistakes that cause nicks and clipper burn. You don't need to be a pro to
groom your dog with confidence. You just need a plan.

  1. Brush out every tangle, then bathe and dry your dog completely. Clippers only work on a clean, dry, knot-free coat.
  2. Pick a #10 blade for most pet trims, and snap on a guard comb if you want to leave the coat longer.
  3. Clip with the direction the hair grows, in long, smooth strokes, starting at the neck and working back.
  4. Hold the skin tight around the armpits, belly, groin and legs, where skin folds and nicks happen.
  5. Touch the blade to your forearm often. If it feels hot to you, it's too hot for your dog.
  6. Finish the face, ears, paws and tail last, slowly, with a smaller trimmer if you have one.
  7. Do NOT shave double coats like Huskies, Goldens and Shepherds.

[VIDEO: full clipping process, 1–3 min]

What You Need Before You Start

  • Dog clippers. Match them to your dog's coat. A light, quiet clipper is fine for tidy-ups, while curly or thick coats need a stronger motor and detachable blades. Not sure which one fits? See our guide to the Best Home Dog Grooming Clippers, organized by coat type.
  • A #10 blade. It's the standard, safest blade for most pet trims. 
  • Guard combs. They snap over the blade to leave the coat longer and keep the blade off the skin.
  • A slicker brush and a metal comb, to remove tangles before you clip.
  • Blade oil and coolant spray, to keep the blade running smoothly and cool.
  • A non-slip surface at a comfortable height. A grooming table is ideal (Best Dog
    Grooming Table), but a sturdy table with a rubber bath mat works too.
  • Treats. Lots of small ones.
  • Optional: a grooming vacuum to pick up hair as you go (Best Dog Grooming Vacuum), and a helper for the first few grooms.

Know Your Dog's Coat First

Your dog's coat

Example breeds

Should you clip?

Curly or wool

Poodle, Bichon, Doodles

Yes. These coats keep growing and need regular clips.

Long and silky

Shih Tzu, Yorkie, Maltese

Yes. Clip the body short or trim to a longer "puppy cut" with a guard comb.

Wire

Schnauzer, Westie, terriers

Yes, for a pet trim. Clipping softens the coat over time, which is fine for most pet owners.

Double coat

Husky, Golden Retriever, German Shepherd, Corgi

No full shave. Trim paws, sanitary areas and feathers only.

Short and smooth

Lab, Beagle, Boxer

No. These coats don't need haircuts. Brush them instead.

Why you shouldn't shave a double coat: the American Kennel Club warns that shaving
removes the insulating undercoat, which can leave a dog more prone to heat stroke and
sunburn. The undercoat can also grow back faster than the outer coat and change its
texture and color for good. Use a de-shedding brush instead.

Leave some length. Even on dogs you can clip, leaving about half an inch or more helps
protect the skin from sun and cold.

How to Cut Dog Hair with Clippers, Step by Step

Step 1: Get your dog used to the clippers

If your dog has never heard clippers, don't start with a full groom. Turn them on near your dog, give a treat, and turn them off. Next, touch the clipper body (not the blade) to their shoulder while it runs, and treat again. Do this for a few days. A dog that has learned the buzz means treats is much easier to groom.

Step 2: Brush out every tangle

Brush your dog all the way down to the skin with a slicker brush, then run a metal comb through the coat. If the comb snags, keep brushing. Clipper blades catch on knots and pull, which hurts and scares your dog. 

If you find tight mats close to the skin, never cut them out with scissors. It's very easy to cut the skin hidden under a mat. Clip under the mat carefully with a #10 blade, or let a groomer handle heavy matting.

Step 3: Bathe and dry completely

Wash your dog, then dry the coat fully. Clippers glide through clean, dry hair. Dirt dulls the blade fast, and damp hair clumps and pulls. Brush once more after drying.

Step 4: Choose your blade and guard comb

The blade number tells you how short it cuts. The higher the number, the shorter the cut.

Blade

Leaves about

Best for

#10

1/16 inch

The safe all-purpose blade: body, sanitary areas, paw pads

#7F

1/8 inch

Short body clips on sensitive dogs

#5F

1/4 inch

A short, soft body trim

#4F

3/8 inch

A medium body trim

#3F

1/2 inch

A longer, fluffier body trim

#30 / #40

1/50 to 1/100 inch

Pros only. Very close and easy to irritate skin with

For a longer look, keep the #10 blade on and snap a guard comb over it. Start longer than you think you want. You can always go shorter, but you can't put hair back.

Step 5: Clip the body with the grain

Start at the back of the neck and work toward the tail. Hold the clipper flat against the coat and move in long, smooth strokes in the direction the hair grows. Clipping against the grain cuts much shorter and can irritate the skin.

Work in sections: neck, back, sides, then chest. Keep the pressure light and let the clipper do the work.

Step 6: Take the tricky areas slowly

The armpits, flanks, belly, groin and the backs of the legs are where most nicks happen. The skin there is thin and folds easily into the blade. Gently stretch the skin flat with your free hand before each pass, and use short strokes.

Step 7: Finish the face, ears, paws and tail

Save these for last, when your dog is calm and tired. Use a #10 blade or a small cordless trimmer.

  • Face: clip slowly from the eyes outward, and keep the clipper pointed away from the eyes. 
  • Ears: hold the ear tip flat between your fingers so only fur sits above them, and stay clear of the ear canal.
  • Paws: trim the hair between the pads level with the pads, not deeper. 
  • Tail and sanitary area: clip with the grain and keep the skin taut.

Step 8: Check, tidy, and reward

Run a comb over the coat to find uneven spots and go over them once more. Then end with a big reward: treats, praise or a walk. You want your dog to remember grooming as something good.

How to Keep Your Dog Safe While You Clip

Check the blade for heat, often. Every clipper blade warms up as it runs. Touch the flat of the blade to the inside of your forearm, the way you'd test a baby bottle. If it feels hot to you, it's too hot for your dog's skin. Spray it with blade coolant or swap in a cool blade before you keep going. A blade that heats up fast may also need oil or sharpening. 

Keep the blade flat. Tipping the blade so the teeth dig in is how scrapes and "clipper rash" happen. Let the flat back of the blade glide along the coat. 

Watch the thin-skinned spots. Armpits, flanks, belly, groin, elbows and inner thighs need short strokes and taut skin. 

Take breaks. If your dog starts pulling away, stop. Forcing it teaches your dog that grooming is scary. Give a treat, let them settle, and finish later or tomorrow. A groom done over two days is still a groom. 

Know when to call a professional. Get help if your dog is heavily matted, if they snap or panic, or if you see skin problems like redness, scabs or lumps while you clip.

6 Mistakes First-Timers Make (and How to Avoid Them)

  1. Clipping a dirty or damp coat. It dulls the blade and pulls hair. Bathe, dry fully, then brush. 
  2. Skipping the brush-out. Hidden tangles snag the blade. Comb through to the skin first. 
  3. Starting with a blade that's too short. A #30 or #40 blade can irritate skin in one pass. Start with a #10 or a guard comb.
  4. Clipping against the grain. It cuts much shorter than you expect and can leave bald patches or rash. Follow the direction the hair grows. 
  5. Ignoring blade heat. Clipper burn looks like a red rash a day later. Check the blade on your forearm often.  
  6. Trying to finish in one session. A stressed dog wiggles, and wiggling causes nicks. Short, calm sessions beat one long fight.

The Right Clipper Makes Every Step Easier

Most of the problems in this guide, like pulling, heat and noise that scares your dog, come down to using the wrong clipper for the coat. A small cordless trimmer that's perfect for a Corgi's paws will struggle on a Doodle. A powerful corded clipper that handles a matted coat may be more than you need for a Shih Tzu.

We compared nine popular clippers using real owner reviews and matched the best one to each coat type, from light trims to thick, matted coats. Each review includes what owners don't love, so you know the trade-offs before you buy.

Related Questions

Which way should you clip dog hair?

With the grain, in the direction the hair grows. Clipping against the grain cuts much closer and is more likely to irritate the skin.

What blade should I use to clip my dog at home?

A #10 blade is the safest place to start for most pet dogs. It leaves about 1/16 inch of hair. For a longer cut, put a guard comb over the #10 blade.

Should I bathe my dog before or after clipping?

Clippers work best on a clean, completely dry, fully brushed coat. Dirt dulls blades, and wet hair pulls.

Can you use clippers on a wet dog?

No. Always clip a dry coat. Damp hair clumps, snags the blade and can lead to an uneven cut.

How often should I clip my dog?

It depends on the coat. Silky and wire coats usually need a trim every 4–8 weeks, curly coats every 6–8 weeks, and long or thick-coated dogs every 8–12 weeks. Short-haired dogs don't need haircuts.

How do I clip a dog that hates clippers?

Go slowly. Let your dog hear the clippers and get a treat, many times, before you clip. Have a helper hold and reward your dog, keep sessions short, and stop if your dog pulls away. A quieter clipper also helps.

Can I shave my double-coated dog in summer?

No. The undercoat helps protect against heat and sunburn, and shaving can damage how the coat grows back. Brush out the loose undercoat instead.

Your Next Step

Your first home groom doesn't have to be perfect. It just has to be calm and safe. Brush first, start with a #10 blade, clip with the grain, and check the blade for heat. Do that, and each groom gets easier for both of you.

If you don't have clippers yet, or the ones in your drawer pull and overheat, start with the right tool for your dog's coat.

About the Author

Hi, I’m Tiffany Kim. I grew up with more than 12 dogs at my parents’ house, but I learned to groom on my own Shih Tzu, Angelyne, so I know how nerve-racking that first groom can feel. My husband and I started Dog DIY Grooming to help owners groom their dogs safely at home. We research tools using real owner reviews and trusted sources, so you can skip the guesswork and groom with confidence.

Sign up now to get a Free Guide on [Your Subject]